Stainless steel approved shear beam load cells, suitable for creating CE-M approved scales with 4 load cells, or for weighing tanks and hoppers, with the aid of its accessories.
CAPACITIES (kg): 500, 1000, 2000, 2500.
OIML R60. C3 precision class.
Stainless steel. IP68 protection.
MAIN FEATURES
C3 PRECISION CLASS
STAINLESS STEEL CONSTRUCTION WITH LASER WELDING
IP68 PROTECTION, IP69K UPON REQUEST
MAX. CAPACITIES FROM 500 TO 2500 kg
SHIELDED CONNECTION CABLE
TEST CERTIFICATE AVAILABLE UPON REQUEST
TECHNICAL FEATURES
Minimum load cell verification interval Vmin = EMax / 10.000
Maximum number of verification intervals nLC = 3000
Combined error 0,017% of Full Scale Output (F.S.)
Full Scale Output 2mV/V +/- 0.5%
Temperature effect on zero 0,002% / °C
Temperature effect on full scale output 0,002% / °C
Compensated Temperature Range -10°C/+50°C
Operating Temperature Range -20°C/+60°C
Creep error after 30 minutes 0,02% F.S.
Maximum tolerated excitation voltage 15 VDC
Input Resistance 1100 ± 20 Ohm
Output Resistance 1000 ± 20 Ohm
Insulation Resistance >5000 MOhm
Safe Overload 150% F.S.
Ultimate Overload 300% F.S.
6-wire shielded cable, 5m long, 5 mm diameter
ATEX VERSION
The CCATEX certificate makes the load cell suitable for use in hazardous areas with protection methods according to:
ATEX II 1G Ex ia IIC T6 (Ta -20÷+40°C) TX (Ta -20÷+65°C) Ga
ATEX II 1D Ex ta IIIC TX°C (Ta -20÷+40°C) TX°C (Ta -20÷+65°C) Da IP65.
The certificate includes the manual and the ATEX CE conformity declaration (available in EN, DE, FR, and IT).
IMPORTANT: the certificate refers to the single load cell. For systems with more load cells, it is necessary to order one certificate for each load cell.
